论影响麻花钻切削因素之间的关系

学生搞不清楚麻花钻刃磨时几何角度之间的关系,导致麻花钻头的刃磨失败,最终使学生形成了麻花钻内容太难,麻花钻刃磨起来太麻烦的结论。用图示、口诀配合文字讲解的方式讲解标准麻花钻切削部分之间的关系,学生易于接受。     

旱作条件下刈割次数对三得利苜蓿主要经济性状的影响

为获得甘肃中部地区旱作种植条件下合理的苜蓿收割制度参数,在陇西县文峰镇典型黄土高原丘陵山地,以秋眠级5级的三得利苜蓿为例,研究不同刈割次数与苜蓿产草量、鲜干比、茎叶比、越冬性能以及营养物质含量等几个主要经济性状的关系。结果表明:在保证苜蓿正常越冬的条件下,每年刈割4次和3次处理组比每年刈割2次的处理组产草量提高7.13%和7.35%(P<0.05)。综合考虑收割成本,每年以收割3次为宜。     

Optimising cutting method and timing for the control of Abutilon theophrasti seed production

Abutilon theophrasti (velvetleaf) is a widespread and problematic annual weed. Greenhouse and field experiments were conducted to investigate the effects of different cutting methods on the viability of A. theophrasti seeds. Three cutting methods were assessed: (1) Entire plant cut and dried (EPD)—plants were cut at soil level and dried with capsules attached on the greenhouse bench or soil surface for 4 weeks; (2) capsules detached and dried (CD)—capsules were removed from plants and dried for 4 weeks; and (3) capsules detached and tested while fresh (CF)—a control treatment. Before drying, the developmental stage (stage one, dark green; stage two, light green; stage three, yellowish-green; or stage four, black with the slightly open capsule) and age (days after flowering, DAF) of each capsule was recorded. Seed viability was measured immediately in the CF treatment and after the 4-week drying period in the EPD and CD treatments. No seeds in the EPD and CD treatments were viable when harvested at the first developmental stage (1–8 DAF) in either experiment, but 100% of seeds in the CF treatment in the field were viable when harvested at 8 DAF. In both greenhouse and field experiments, seeds attained full viability at earlier harvest ages in CF than in EPD or CD treatments, suggesting that seeds might become viable relatively early in development but lose viability if allowed to dry. These findings could be applied to optimise late-season mechanical control of A. theophrasti.     

核桃组培快繁体系的建立

为建立‘南核1号’核桃组培快繁体系,以带芽茎段为外植体,开展外植体采集时间、初代诱导、继代增殖和生根培养各阶段试验。结果表明,全年中4-5月为最佳外植体采集时间;最佳诱导培养基为DKW+6-BA 1.0 mg/L+NAA 0.1mg/L,诱导率为66.7%;最佳增殖培养基为DKW+6-BA 1.0 mg/L+IBA 0.01mg/L,增殖率为63.3%,增殖系数为3.83;生根采用二步诱导生根法,先在附加IBA 6.0mg/L的1/2DKW中暗培养,再转移到1/4DKW中光培养,生根率为46.6%。     

薄荷的快速繁殖与栽培技术的研究

本文介绍了薄荷的特性、栽培技术及用途，表明它在我们日常生活中起着重要的作用。用薄荷的组织培养方法可加速其繁殖系数，以达到迅速应用的目的。     

夏枯草(Prunella vulgaris)组织培养和快速繁殖

以夏枯草的叶片、茎节、顶芽为外植体在含不同浓度的6-BA和NAA的MS培养基中培养,比较其增值率和分化率.发现以茎节为外植体,诱导不定芽的最佳培养基为MS 3.0 mg/L 6-BA 0.1 mg/L NAA,分化率为100%,增殖倍数为6.8.以顶芽为外植体,不定芽的最佳培养基为MS 3.0 mg/L 6-BA 0.05 mgm NAA或MS 3.0 mg/L 6-BA 0.1 mg/L NAA,分化率分别为88.2%和84.6%,增殖倍数分别为5.8和6.2.最佳生根培养基为1/4MS NAA 0.5 mg/L,生根率为100%.将生根的组培苗经过驯化移栽后,成活率为93%.表明,叶片难以分化;茎节的分化率效果最好;顶芽的分化能力介于二者之间.     

Experimental Investigation on Chip-break Influenced by Cryogenical Cold Air jet

In machine cutting, the replacement of traditionalKGcutting solution with cryogenical cold air jet not only possesses a good cooling and lubricating efficiency, but also can avoid the occurrenceof environmental pollution. In order to clarify the manner and performance of discharged cutting chip under cryogenical cold air jet condition, an experiment was carried out for steel grade 45 in the dry and cryogenical cold air jet cutting comparatively. The effects of cryogenical cold air jet on the breaking of cutting chip are discussed. Experimental results reveal that, in the valid ranges of pressure and temperature, the cryogenical cold air jet can widen the chip broken region effectively. Different insufflating angle of cold air behaves different influence on the chip-break. From the experiment, it has been gained that the optimized jet insufflatingangle, temperature effecting range and pressure working range of cold air, which provides the foundation of industrial manufacturing.     

Statistical Model on the Time and Time Difference Error of Arrival in TDOA Location Estimation

Additional time delay of arrival resulted from non-line of sight(NLOS)propagation and muti-path effect in(cellular) environment is the dominant factor resulting in TDOA location error,study on the statistical property of TDOA error is useful for improving the accuracy of TDOA location.Based on the exponential distribution property of NLOS propagation delay,and considering the system error resulted from the signal detection,the authors establish a statistical model of arrival time and a model of TDOA error distribution by statistics when non-light of sight and multi-path propagation exist.The models reflect the statistical property of arrival time and TDOA error in cell network,the simulation shows that the proposed models have a good accuracy and a satisfactory behavior.     

THE STUDY OF STRAIN FATIGUE CRACK PROPAGATION BEHAVOURS OF VANADIUM BEARING HSLA STEEL

In this paper, the strain fatigue: crack propagation rates of vanadium bearing HSLA steel with different micro-structures are measured under constant load conditions, and the relationship between the crack propagation rate and the microstructures of steel is also studied.     

A Study on the Mathematical Models for Two Dimensional Guillotine Cullting-stock

Based on the analysis and study on some existed models for two-dimensional Guillotine Cutting-Stock problem, it is pointed out that some kinds of the models may miss some good cutting patterns,and some may result in inadequate solutions because of only considering the patterns with the smallest waste. A kind of revised two-dimensional cutting-stock models are developed,which transform the two-dimensional problem into the one-dimensional one using the dimension-decreasing heuristic method and whose initial patterns are considered comprehensively. In this kind of models, not only the least waste,but also the other constraints,such as the demands and the relative area of the order plates are considered.